All Terrain Garden Wagon
Product Overview
Ground conditions decide whether a wagon gets used or stays in the shed. The All Terrain Garden Wagon is specified around its tyre: a 13 inch air wheel with a broad 5.00 inch section on the TC4205N, TC4205B and TC4205F, and a narrower 4.00 inch section on the TC4263. Section width sets the contact patch, and the contact patch sets how deeply a loaded wagon presses into wet soil, sand or loose gravel. A wider section spreads the same mass across more square centimetres, so the wagon stays on the surface rather than cutting a channel through it.
Pressure matters as much as width. Running these air wheels at the lower end of their range lets the carcass flatten slightly and lengthen the footprint, which is the right setting for a boggy orchard or a lawn after a week of rain. Firming them up for a gravel drive or a concrete yard cuts rolling resistance and makes the wagon easier to start. One wagon therefore covers ground that would defeat a narrow-wheeled cart.
Steering is laid out for the same conditions. The front axle swivels through a full circle, so the wagon turns inside its own length between trees, around a compost heap, or through a gateway narrower than the tub. The mesh tub is open by design: mud and water drain straight through the floor instead of pooling, which keeps the return load lighter and stops the panels silting up during a wet job.
Key Features
13 inch wheels in two section widths
The TC4205N, TC4205B and TC4205F run a 13"x5.00-6 air wheel for soft ground; the TC4263 runs a 13"x4.00-6 air wheel that turns more easily on firm surfaces.
Contact patch rather than ground pressure
A broad tread spreads mass along a longer footprint, so a loaded wagon crosses wet grass, sand and loose gravel without sinking to the rim.
Tyre pressure tuned to the surface
Lower pressure for bog and lawn, higher pressure for hard standing. The same wagon is re-tuned in a minute with a pump instead of being bought twice.
Full-circle swivel front axle
The front axle rotates through 360 degrees, which lets the wagon pivot around a trunk or turn inside a gateway without reversing.
Open mesh tub that drains
Wet soil, rinsed gravel and cut grass shed water through the floor, so the tub does not carry a slurry back to the storage point.
Wash-down after a wet run
Rinse tread and hubs to clear grit before it works into the bearings, and stand the wagon on its tail so the tyres are not left resting on one flat spot.
Technical Specifications
|
Specification |
Details |
|
|
|
|
|
|
Product Name |
All Terrain Garden Wagon |
TC4205N |
TC4263 |
TC4265 |
TC4205B |
TC4205F |
|
Loading capacity |
Customized |
500KG |
550KG |
450KG |
500KG |
500KG |
|
Body size |
L1410xW760x H1140mm |
L1180xW690x H940mm |
L1520xW865x H1040mm |
L1382xW615x H1140mm |
L1370xW670x H1025mm |
|
|
Wheel size |
Customized |
13"x5.00-6 air wheel |
13"x4.00-6 air wheel |
13"x5.00-6 air wheel |
13"x5.00-6 air wheel |
13"x5.00-6 air wheel |
|
Wheel material |
Customized |
Rubber+steel |
Rubber+steel |
Rubber+steel |
Rubber+steel |
Rubber+steel |
|
QTY |
320PCS/40'GP |
360PCS/40'HQ |
300PCS/40'HQ |
400PCS/40'GP |
500PCS/40'GP |
Applications
- Woodland and orchard tracks: leaf litter, fallen branches and soft ground where a narrow wheel would bury itself.
- Wet lawn and riverbank margins: the wide tread keeps the wagon riding over saturated ground instead of leaving ruts behind it.
- Gravel drives and loose scree: a broad contact patch stops the wheels skating on shifting stone.
- Sand and soft bedding areas: sand behaves like a fluid under a narrow wheel and closer to a firm surface under a wide one.
- Sloped plots: the swivel axle holds a line across a camber instead of sliding toward the fall of the ground.

OEM & Customization Service
Tyre specification leads the conversation on an OEM order here. Section width, tread pattern and carcass ply can be changed to suit the surfaces your market actually works on, and the pressure range printed on the sidewall is set to match. Tub length, mesh aperture and panel height are cut to order, and the front axle can be supplied as a fixed unit where the full swivel is never needed. Coating colour, parking brake and branded plate are optional. Tell us what the ground looks like and we will specify an All Terrain Garden Wagon around it.







FAQ
Q: What makes a wagon suitable for all terrain?
A: Tyre width and pressure, in that order. A 13"x5.00-6 air wheel presents a broad contact patch that lowers the pressure on the ground beneath it, which is what stops a loaded wagon sinking into soft soil. A narrow hard wheel concentrates the same weight into a small area and cuts in.
Q: Will wide tyres stop the wagon sinking in mud?
A: They reduce it substantially, but nothing floats over standing water. In deep mud, drop the load, keep the wagon moving in a straight line, and avoid spinning the wheels, which digs a hole and throws slurry into the hubs.
Q: What pressure should I run?
A: Start at the lower end of the range printed on the sidewall for lawn, sand and wet ground, where a longer footprint keeps the wagon on the surface. Move toward the upper end for gravel, concrete and longer runs, where rolling resistance counts for more than flotation.
Q: Why is the TC4263 fitted with a narrower 4.00 section tyre?
A: The TC4263 carries a 550 kg rating on a compact L1180xW690xH940mm tub, and the 4.00 section keeps the turning effort low on firm ground. If your customers work mainly on soft or sandy surfaces, the 5.00 section models are the better match.
Q: Anything to do after a wet or gritty run?
A: Rinse the tread and hub area to clear grit before it reaches the bearings, check that the swivel axle still rotates freely, and store the wagon upright so the tyres are not under a constant load.
Hot Tags: all terrain garden wagon, China all terrain garden wagon manufacturers, suppliers, factory





