How to Determine if a Platform Truck is Suitable for My Scenario

Apr 06, 2026

Leave a message

Basic Working Condition Matching Verification First, check the three most critical hard conditions. If they are not met, eliminate the vehicle immediately:

Load Capacity and Dimensions: The actual maximum weight of the goods to be transported must not exceed 80% of the platform truck's rated load capacity; the length and width of the goods must be smaller than the platform truck's platform surface, with at least 10cm of clearance around the edges to prevent slippage.

Operating Height: The actual maximum operating height required must be 1-2 meters lower than the platform truck's rated maximum height to avoid excessive wear and tear from prolonged full-height operation.

Site Conditions: Confirm the ground material of the work area (concrete/steel plate/asphalt), the minimum width of the aisle, and ensure the platform truck's minimum turning radius is smaller than the aisle width. Its obstacle-crossing ability must be adapted to the unevenness and elevation differences of the ground.

 

Environmental and Safety Compatibility Check For special working environments, confirm that the platform truck's protective capabilities meet standards:

For chemical/painting workshops with explosion-proof and corrosion-resistant requirements, a customized platform truck with the corresponding explosion-proof rating and corrosion-resistant shell must be selected. Ordinary civilian models cannot be substituted.

For models operating outdoors, the protection rating must reach IP54 or higher to withstand rain and dust intrusion; in low-temperature environments, the equipment's operating temperature range must cover the local winter's lowest temperature.

In high-frequency human-machine mixed operations, the platform vehicle must be equipped with non-contact obstacle detection + mechanical anti-collision dual protection, and the emergency stop switch response time must not exceed 0.5 seconds.

Send Inquiry